Texecom Monitor
Texecom Monitor connects your Texecom alarm to an alarm receiving centre (ARC) over the internet, with an optional 4G path for extra resilience. If your alarm used BT Redcare or a phone line, it's a straightforward way to get it monitored again without replacing the whole system.
Morse Security installs and maintains Texecom alarms across Essex. We can fit the communicator, register your alarm with a monitoring centre, and set up the Texecom Connect app on your phone.
How it works
Texecom Monitor works with Premier Elite panels and a SmartCom communicator. The communicator you choose sets the signalling grade.
Signals over your Ethernet or Wi-Fi connection. Single-path signalling (SP2), suitable where your insurer doesn't require dual path.
Adds a 4G path alongside Ethernet or Wi-Fi, for dual-path signalling (DP2 to DP4). It can also run single path over 4G alone.
Signalling is managed through Texecom Cloud, and you can use the Texecom Connect app to set, unset and check your alarm.

FAQs
Texecom Monitor is Texecom's alarm signalling service. It sends alarm and fault signals from a Texecom Premier Elite alarm to an alarm receiving centre over IP, with an optional 4G path, replacing older phone-line and Redcare signalling.
It is designed for Texecom Premier Elite control panels, fitted with a SmartCom or SmartCom 4G communicator. If you have a different make of alarm, we can recommend other signalling options.
Single path sends signals over one route, such as your broadband. Dual path uses two routes, such as broadband and 4G, so the alarm can still signal if one fails. Many insurers ask for dual path (for example DP2 or DP3) on higher-risk properties.
Yes. BT Redcare closed in August 2025, and Texecom Monitor is one of the options for getting a Texecom alarm monitored again. See BT Redcare replacement.
Yes. Texecom Connect lets you set and unset your alarm and see its status from your phone, alongside the monitoring.
Usually, yes. If you have a Premier Elite panel fitted by another company, we can check it, add the communicator and take over maintenance. See alarm takeovers.
Tell us your panel model and your insurer's requirements and we'll recommend the right signalling.
Request a quoteCall 01245 860227